FOR FIRST-TIME PPE MANUFACTURERS
Planning a production line? Start with the product.
Many investors start by asking how much a PPE machine costs. The better first question is: which product already has demand in your market?
Send us one product, your expected output and budget range. We will recommend a practical starting configuration—not a generic machine list.
One productPhoto, sample or drawing
Expected outputDaily or monthly demand
Budget rangeYour realistic starting level
No complete factory plan required · Reply within 7 working hours
How we define the right machine configuration
THE RIGHT ORDER
Four decisions make the machine solution clear.
Technical details matter—but only after the production goal is defined.
Define the product
Size, material, design and required functions.
Confirm the demand
Choose one or two products with real local orders.
Set the starting level
Match automation to output, labor and budget.
Plan the next stage
Reserve practical functions for future upgrades.
PRODUCT FIRST, MACHINE SECOND
“Surgical drape” is still too general.
The same product name can require very different processes. A photo, sample or drawing helps us identify the functions the line actually needs.
Once the product is clear, the right process becomes much easier to define.
Surgical drape details
- Round, square or custom opening?
- Reinforcement around the fenestration?
- Adhesive tape or fluid pouch?
- Standard or special folding method?
Surgical gown details
- Material and protection level?
- Reinforced or standard gown?
- Cuff, collar and tie design?
- Joining method and expected output?
REDUCE THE STARTING RISK
Begin with products that already have demand.
A long product list looks attractive, but it also multiplies raw materials, settings, operators, quality checks and management work.
Surgical gowns+ isolation gowns
Surgical drapes+ mayo covers
Bed sheets+ disposable covers
How automation affects the investment
USE THE BUDGET WHERE IT CREATES VALUE
Budget defines the automation level—not the quality standard.
The same product can be made with different levels of automation. The right choice depends on demand, labor cost, output and investment stage.
PRACTICAL START
Automate the core process
Begin with the main production machine. Keep selected steps manual if they do not yet justify the investment.
- Main forming or converting process
- Manual folding where practical
- Manual or separate packing
HIGHER OUTPUT
Add automation with a reason
Upgrade the steps that reduce labor, improve consistency or unlock functions customers are ready to buy.
- Automatic folding
- Online packing
- Additional capacity and functions
PRODUCTION ROADMAP
From raw material to packed PPE products
We configure the line around the product you plan to sell first.
Sterilization is optional and depends on the product and local requirements.
Need a Product-by-Product Roadmap?
We can organize the core machines, optional steps and future expansion functions around your actual product list.
How to plan future upgrades
PLAN BEFORE THE MACHINE IS BUILT
Think about future functions now. Pay for them when needed.
If future needs are discussed early, the structure and control system may reserve space for practical upgrades.
Produce reliably
Build the machine around the product and output you need in the first stage.
Prepare the design
Discuss reinforcement, tape, punching, folding, packing and related plans early.
Upgrade with orders
Add suitable functions without replacing a complete machine whenever the process allows.
Important: Not every new product can be added to the same machine. Some products require a different process. This is why future plans should be reviewed before the machine is built.
A CLEARER PROPOSAL
The goal is not the biggest line. It is the right line.
A practical recommendation should produce your current product reliably and leave a realistic path for future development.
Start with one product →Required machine scopeWhat is necessary now and what can wait
Expected outputA realistic capacity range for your product
Factory requirementsOperators, floor space and power
Upgrade directionFunctions worth reserving for later
FACTORY PLANNING FAQ
Frequently Asked Questions
Short answers to the questions investors usually ask before requesting a machine proposal.
How much does it cost to start a PPE factory?
The cost depends on the products, production capacity, automation level, packing method and factory conditions. Define these inputs first, then prepare a machine and facility estimate.
Can I start a PPE factory without previous manufacturing experience?
Yes. Many projects begin with medical distributors or investors who understand the market but are new to production. Start with a limited product range and include operator training, process control and quality planning.
What machines are needed to manufacture surgical gowns?
A gown line normally includes material feeding, cutting or forming, joining processes for sleeves, body, ties, cuffs and collar, followed by inspection, folding and packing. The configuration depends on the gown design, material and required output.
What machines are needed to manufacture surgical drapes?
Drape production may require cutting, opening or punching, reinforcement, adhesive tape, fluid pouch, folding and packing. Different drape designs need different machine solutions, so a product sample or drawing is important.
Explore our PPE machine range, learn about Deheng, or contact the project team.
GET A PRODUCT-BASED RECOMMENDATION
Send Your Product List for Machine Recommendation
Partial information is fine. We will help identify the machine configuration needed now and the functions worth reserving for future upgrades.
Real production reviewMaterial, design and process—not a generic machine list.
Direct Deheng responseYour information goes to our existing inquiry system.
7-hour first replyA specialist will contact you to clarify the next step.