FAQ – Surgical Drape Making Machine

Surgical Drape Making Machine FAQ

This surgical drape making machine FAQ explains how to select the DEHENG DH-C configuration for your drape design. Start with the finished product, material specification and required functions, then confirm the equipment scope. Review the DH-C surgical drape making machine for the related product information.

1. What does a surgical drape making machine do?

It converts the specified roll material into the required disposable drape format using the agreed production modules. The process depends on whether the product requires openings, adhesive tape, reinforcement or folding. These requirements should be shown on the sample or drawing before the machine configuration is selected.

2. What is the DH-C production speed?

The confirmed production speed is 30–50 m/min. This measures material travel in metres per minute. Finished pieces per minute depend on the drape length and production configuration, so a single fixed piece-rate figure should not be applied to every drape design.

3. Are hole cutting, adhesive tape and reinforcement standard?

No. Hole cutting, adhesive tape application, reinforcement and folding are optional modules selected for the product design. A machine quotation should identify which functions are included. Send the hole shape and position, tape location and reinforcement layout so the proposed scope can be reviewed.

4. Are inspection, labelling and PE lamination included?

Camera inspection, labelling and PE lamination are also optional. Specify the required inspection or labelling task and material construction in your enquiry. These functions should be confirmed individually rather than assumed to be present on every DH-C machine.

5. What material information should I provide?

Send the material type, basis weight or thickness, roll width and a sample. For laminated or reinforced drapes, describe each layer and the reinforcement material. Include any adhesive tape and release liner specifications. Material suitability and the joining process must be reviewed for the actual sample.

6. Can different drape dimensions and openings be reviewed?

Yes. Send a drawing for each required design, showing finished dimensions, opening shape, hole position, tape and reinforcement locations. The applicable adjustment range, tooling and modules must be agreed for the selected configuration. A changeover time should be confirmed for the actual designs rather than promised as a universal figure.

7. What power supply and factory space are required?

Voltage can be customized to 380V / 220V according to customer requirements. Confirm the installation-site power specification with the order. Request a layout for the selected module arrangement, including material loading, operator access and downstream handling. Footprint, power and compressed-air requirements should be taken from the final configuration.

8. Does the equipment guarantee finished-drape certification?

No. Finished-drape performance depends on the materials, design, manufacturing process and product testing. Machine selection does not by itself establish certification or cleanroom compliance. Include your buyer requirements when preparing the product and process specification.

9. How should maintenance and service be planned?

Ask for the maintenance schedule, wear-part list, operator training scope and installation support to be specified for your order. Service arrangements and response expectations should be agreed with the quotation. Component life depends on operating conditions and maintenance; a fixed replacement interval should not be assumed for every production line.

10. What should I send for a quotation?

Prepare a drape sample or drawing, material specification, finished dimensions, hole and tape positions, reinforcement details, folding requirements and target output. List any inspection, labelling, lamination or downstream packing requirements separately. Review the surgical drape production planning guide and medical drape machine category for related selection information.